RP Toolz webshop
Click to the “RP Toolz webshop” if you would like to purchase the tools.
Check out our new tools
Cutter
Handles
Your 3. hand
Delux wooden storage boxes
For RP Toolz Punch and die sets
The new Rolling set
Ideal for barrels and tubes making
Tool material: Eloxed aluminium base , stainless steel rods
Tool Usage:
Place the material over the appropriate groove. Choice the right diameter rod for this groove, and press the material down into the groove. Roll the rod in both directions, back and forth, to achieve the correct shape. To create a closed cylindrical shape, use another rod of the next size down and roll until closed. The material should spring back slightly into shape.
RP Toolz Big Punch and die tool set.
The set contains a die plate, 12 different punch tool from 2 mm to 4,5 mm, and a mini hammer.
Square rule – D shaped
Square rule – L shaped
The new Hexagonal Punch and die set from RP TOOLZ
The set contains a die plate, 6 different hexagonal punch tool from 0,7 mm up to 2 mm, and a mini hammer.
How to use it?
1. Take a PVC or Styrene sheet.
2. Put the workpiece into the die and tighten the knorled knobs
3. Use the desired size punch tool
4. Knock out the circular piece with the help of the hammer
5. Remove your workpiece from the die by loosen the knobs
6. The result
RP Toolz Punch and die tool set.
The set contains a die plate, 16 different punch tool from 0,5mm to 2mm with 0,1mm steps and a mini hammer.
The RP TOOLZ offers Photo etch bending tools in 3 different sizes.
18cm long Photo etch tool
13cm long Photo etch tool
8cm long Photo etch tool
How can we use?